Beepbeep
-
Posts
31 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by Beepbeep
-
To answer a couple of your other questions, there are latches to secure the windshield to the brush guard. Regarding loading as you can see I loaded mine on forwards, the bulkhead of the Weasel is it's centre point so I loaded mine with the centre point just forward of the centre axle of the trailer so the weight was biased toward the hitch Chris
-
I picked mine up from the docks 18 months ago, tracks chocked front and rear, ratchet straps on the pintle hook and crisscrossed on the idler wheels and drive wheels and finally the winch cable around the idler wheel arms….didn’t budge an inch!
-
@OZM29C thanks very much
-
@OZM29C did you find the original tooth profile? I'm thinking of getting my old sprockets repaired and it would be good to know what profile I'm aiming for
-
Oh wow! I don't envy you that job
-
My thoughts exactly! An update, my sprockets have worked out a little more costly to be hardened than I thought due to the way they price these jobs. They're priced on weight so you pay to treat the whole piece but I didn't want the rear faces hardened in case they damage the track guides so there was an extra charge added for coating the areas you don't want hardened! It wasn't very much though and the four of them have still come in under £140 so not too bad.
- 42 replies
-
- 1
-
-
- tracks
- track restoration
- (and 1 more)
-
@Patrick Tipton That's really bad and from what I've learned now there's no excuse for it. I went to two local hard facing companies and they both told me that the factory spec really isn't very hard and that there's steel plate available that has a compatible hardness, think it might have been EN31 but I'm not sure. I checked Accu-Rite's listing and our sprockets are made from hot rolled mild steel and when I checked it has a hardness rating half of the factory spec! I was also told that there are welding rods available with various hardness ratings so in theory it may be possible to repair the sprocket teeth. Weasel ownership really is a learning curve isn't it?
- 42 replies
-
- 1
-
-
- tracks
- track restoration
- (and 1 more)
-
Well I've solved my problem, I hope! I couldn't find anyone that flame hardens but I found a local company that will carburise the sprockets to the hardness that I want and at a very reasonable price, so reasonable that I wonder why the manufacturer doesn't harden them as standard.
- 42 replies
-
- 1
-
-
- tracks
- track restoration
- (and 1 more)
-
Wow, that’s interesting! Thank you for that Chris
-
Yes, I read that recently, that the teeth should be hardened but to a lower level than the grousers. Procedure as follows - ‘Flame harden contact surfaces of teeth 1/16” deep to Shore Hardness 70 minimum. Heat to 843 degrees Celsius - quench in oil - draw to Brinnel Hardness 241-269/Rockwell Hardness C 24-27. Hope this makes sense and that it helps. It doesn’t mean much to me but I’m going to go to my local machine shop and see what they say Chris
- 42 replies
-
- 1
-
-
- tracks
- track restoration
- (and 1 more)
-
Hi Tomek, thanks for your post. I bought the sprockets on eBay but haven't fitted them yet. I've got to say yours look really worn for having only done 200 km, I asked a local machine shop about hardening when I bought them and they advised against it, guess I'll go back and see them 😞
-
No he doesn't ship, I forgot to mention that. I know someone here in the UK that has a set but he had to go over to the Netherlands to collect Chris
-
@Dake20 yes they are available from Oscar Wennink in the Netherlands, you'll find him on Facebook
-
@Kevin Vogel There you go, it’s a Baldwin P53 Chris
-
It's a standard Junior Military filter, a Mann PF1155 is a modern day equivalent. I've got a Baldwin in the workshop that you might find easier to get but I can't remember the number, I'll take a look tomorrow Chris
-
@Patrick Tipton let us know how you get on, I’ve just split the wheels from the old sprockets so a little way behind you
- 42 replies
-
- 1
-
-
- tracks
- track restoration
- (and 1 more)
-
Hi Mark, they don’t appear to have a website, phone number is 559-292-6933. I bought my sprockets from them through eBay Chris
-
Mine's called The Weedsel as, for some inexplicable reason, it stinks of weed!!
-
@OZM29C thanks very much for that
-
Ah you lucky man! could you tell me what thickness the rubber is? I haven't been able to find that info anywhere
-
@OZM29C thanks for that, very helpful. One last question, your wheel looks as though it's been re-rubbered, something else I need to get done. Did you do it yourself or farm it out and what thickness rubber is it?
-
@OZM29C I see you've bolted your sprockets and drive wheels, did you use countersunk socket head screws on the sprocket side?
-
Will do rocker, they’re off to a good start I was messaged yesterday to say the sprockets will be shipped this week!
-
Seeing those shows just how worn my sprockets are, thanks for that. I’ve ordered a set from Accu-rite Machine works in California so hopefully that’ll be the first step in rectifying my problem. Thanks again
-
Thanks very much, I’ve got Norwegian bases in my Weasel which are about 30mm lower at the back and I just wanted to confirm that was correct before recovering them. Thanks again
