Jump to content

F.Janssen

Members
  • Posts

    107
  • Joined

  • Last visited

  • Days Won

    28

Everything posted by F.Janssen

  1. @robert06Fr Can you share the part number / picture you are looking for?
  2. FYI I bought some parts from this gentleman. Quality is outstanding. Shipment will take some time, but is worth waiting for.
  3. I think I have all latest numbers..... Did not update this for too long.
  4. Thanks, I still update the sheet once in a while, and need to do a new list soon. to be continued
  5. Thanks, for some reason I completely looked over it.
  6. Hi all, I've been searching through the manual, but cannot find any main dimensions. Or I'm looking way over them.... Does someone have the dimensions for a STD engine for: - Pistons - Cilinder diameter - Crankshaft Main Bearing Journals - Crankshaft Connecting Rod Journals thanks a lot Frank
  7. Hi Kevin, As far as I'm aware it is the same as for Willys MB and Ford GPW. So any parts supplier should be able to provide it to you. I'm using this one: MANN PF 1155 https://catalog.mann-filter.com/EU/ger/catalog/MANN-FILTER Katalog Europa/Ölfilter/PF 1155 k
  8. Hi Ernest, Thanks for sharing the data. Can you please clarify which numbers belong to each other? I have the feeling some numbers do not match each other. thanks!
  9. Hi Corey, That's some nice work done! THanks for sharing. I did a similar extercise a while ago and attached the file to this post. My file is based on the M29C with the push/pull light switch. I also added the ordering number for the following website. I did not order any of these items yet, so there might be incorrectness. Good luck with your wiring. https://www.autoelectricsupplies.co.uk/ Wiring Studebaker Weasel.xlsx
  10. Found myself 2 gearboxes, of wich 1 original Weasel and 1 earlier gearbox. Looking for all the internals, so if somebody has parts, please let me know. 1x March 1941 1x May 1945
  11. Beside work on the Weasel, my Willys MB had some heart surgery... Weasel works were to weld the bracket on the oil pan and make a new piece of wood which is fixed on the engine cover near the gas pedal. And found some nice gem....which needs to wait for the next years before even thinking of mounting.
  12. Continuation Can somebody tell me if there are 2 bushings in the axle for the high/low shifting? There are none in my assembly but it seems very loose.
  13. That's a Norwegian army rebuilt plate indeed. Good luck with your resto!
  14. Hi Fred, I'm going to fit new bearing, but beside that, all is looking pretty well. One of the hubs was completely filled with grease, the other one only partially. To get to your question. I don't know if the hub should be packed yes or now. What I found in my hubs was there were some small cups fitted. I don't have a picture with me, and will only be able to make a picture on Thursday. On the hub filled with grease, there was only 1 cup fitted, approx 1,5cm in the hub. On the other hub, there was no grease in the chaimber, and there were 2 small cups fitted. Apparentely these cups might be sufficient to make sure the grease does not finds it way to the bottom chaimber. Although, there is a grease zerk on the hub, so overfilling is quite easy. Picture to follow. regards Frank
  15. Thanks! Quotes are pending. Meanwhile I started on the Idler Wheel...which mainly was a lot of oi/water/blurry.... And it seems that previous drivers were unaware when to stop after the tracks were too loose or ran off.
  16. THANKS! I am indeed planning to use bronze bushings. The needle bearings were totally gone, and the shafts have some pitting on them which would not be ideal for new roller bearings. The seal number really helps! Thanks for that! Do you happen to also have the seal number for the Idler Wheel ( SD-900816 ) Than I can order all bearings and seals at the same time 💰
  17. I got a very nice gift, which was a repro "push start" button. Having my dash completed with some small incorrect things remaining. Furthermore started on the return rollers. The seal in those rollers, is consiting of 2 parts. In the manual this only has 1 number: SD-908196 Anyway it is possible to remove the seal seperatly. Does anyone know if there is a replacement part for only the seal (RH)?
  18. Thanks a lot Laurent! I know of the speedometer. It is a repro one, and I bought it for a reason, although I don't know what it exactly was any more, I think to be able to substitute with my Willys
×
×
  • Create New...