Larry Mass
-
Posts
67 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by Larry Mass
-
Thanks Patrick for your knowledge and quick reply. I have the engine out of the machine so I thought I would check the alternator because it would be almost impossible to get it out in the machine. Yes it does motor. Thanks again Larry
-
Hi all I have a generator that does turn whe you put power to but doesn't spin as fast as it should. I hooked it up to a motor and ran it to see what voltage comes out of it and it only puts out 8 to 10 volts I think they should put out13 to 14 volts am I right? The generator is out of my t15 weasel, I am wandering if any one would have a suggestion why it's not putting out the required voltage. Thanks in advance Larry
-
This is what I made to tension my tracks, I made it from scrap material. Larry
-
I have one track with original track bands the track seems awful tight I'm not sure why? I have new track bands on the other side and there seems to be lots of differences in length. I am wandering if I will have to do a lot of corrective steering with this problem? Larry
-
Hi all I am looking for a spring yoke for a t15, one of mine is bent and can't figure out where the bend is and not sure how to go about straightening it. If anyone is wreckin a body and has a spare I would gladly buy it. Cheers Larry
-
Actually I don't need the whole belt just a couple of pieces that are 4 track pads long that are in decent shape Cheers Larry
-
Thanks again Patrick! With Mike's new belts he must have sold a few of them so I was thinking someone might have something Larry
-
Thanks Patrick I had reached out to him already and he cut his belts up so he could sand blast the pads. Larry
-
Hi everyone I am looking for some good used track belts that were replaced I am willing to buy a section of them to use to fix up my broken track Cheers Larry
-
Thanks Patrick! I am not sure if any other radios are available at a reasonable price. Larry
-
Hi and Merry Christmas to all, after a year break I am finally getting back to my t15 I have been thinking of radios I believe the src 508 was in them. I am looking for a complete set or components of the don't have to work sa it is just for static display, also looking for the bc 45 aerial mount, all this stuff seems to be as rare as hens teeth. I was wondering if anyone would have anything that they would part with or have a lead on this equipment. Thanks Larry
-
Thanks guys i am amazed at how much help you can find on this site, so much knowledge thanks again. Larry
-
Hi every one i am looking for the pintal hitch for my t15 has anyone got a spare they would sell? Or good pictures of an original one? Thanks Larry
-
They look great can't wait to get my track back on my machine any idea when he will do a production run. Larry
-
Hi all my t15 water pump decided to start leaking now i am wandering if this is the right pump on it now and what would be the new number for a replacement. Crazy thing is i had the engine out and contemplated changing it but decided not to as the bearings were good now i have to change it in the machine. I knew it would bite me in the ass. Thanks Larry
-
Thanks Patrick, what are the clips for on the front of the windshield they look like they are to hold some kind of cover on. Thanks again Larry
-
Hi all i have a windshield wiper on my t15 and am wandering if it is the proper on here is a couple of pictures. I have another question, i would like to add a demolition timer to my t15 and dont know if there is a box around the timer and where it is located.
-
Hi Rob they look fantastic are they in the production stage yet? Larry
-
Thanks Patrick i will try him Larry
-
Hi to all hope everyone is well and safe in these crazy times. I am stating to work on my t15 after a summer off, i am missing the primer pump and am wandering if there is one in somebody's stash of parts that they may want to get rid of, or if anyone has a line on an original looking off the shelf primer. Any leads welcome. Thanks Larry
-
Are there any originals out there that could be copied Larry
-
Hi all I am wadering what hand grips were used on the stearing tillers and if anyone is reproducing them. Larry
-
Thanks Rob i will try to fit them there. Larry
-
Has anyone have any idea how to get the right track tension with out using a tesioning tool. Larry
-
Thanks Dan its going to be a while before i get the other track done as the belts are in really bad shape and can't be used i am really not sure what i can do. Larry
