Jump to content

Recommended Posts

Hi every one i have a couple of questions in my t15 i have a pipe on the right side of the hull under the driver seat and it is cut off at the floor and the top has a flair end what might this be for. Also on the wiring guard that runs along the inside of the hull there are 2 short 1/4 in bolts welded in sticking up on the top not sure what goes on them. There are 4 little clips on either side of the hull high and just in front of the drivers seat i am thinking it is for padding to protect the drivers knees am i right. What rubber handlesgo on the steering levers and is anyone reproducing them.

Thanks 

Larry 

 

20210322_100801.jpg

20210322_100647.jpg

20210322_100640.jpg

Link to post
Share on other sites

All I have left is the wire ring that formed the shape of it. I think it was a cushion for the drivers legs one on each side maybe both the guy in the front seat and the one in the rear.

Dan

Link to post
Share on other sites

Here is another picture of the mount and what remains of one of the cushions on my T15. Maybe the tabs held the pads in place??

Dan

IMG_0744 resize.jpg

20200131_115829.jpg

Edited by M29
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...