F.Janssen Posted September 2 Share Posted September 2 Hi all, Having not documented well enough during the disassembly. Doing the assembly now, and cannot recall how the several parts will go together. In the cover of the solenoid, there are 2 large holes, which I assume are dust covered by the 2 brown rings with the rubber around it. Although when doing that, the part that seems to fit on the right side (in the pictures) on the copper bolt, does not match any more. Anybody pictures or a schematic? thanks Frank Quote Link to comment Share on other sites More sharing options...
Jim Gilmore Posted September 3 Share Posted September 3 I would suggest getting a copy of TM 9-1772A "engine, engine accessories and clutch for light cargo carrier T24" from Portrayal Press. 2 Quote Link to comment Share on other sites More sharing options...
F.Janssen Posted September 5 Author Share Posted September 5 Hi Jim, thanks for the picture. I was definitely using the incorrect manual (SNLG), so thanks for the heads up. I do have a copy of the TM9-1772, so should have been doing a broader search. thanks! 1 Quote Link to comment Share on other sites More sharing options...
F.Janssen Posted September 8 Author Share Posted September 8 (edited) This worked out, thanks again. Only thing incorrect is the rubber booth/sleeve. Edited September 8 by F.Janssen 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.