Jump to content

Guido Ferluga

Members
  • Posts

    26
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by Guido Ferluga

  1. 
    
    
    
    Good evening again I ask for help to reassemble the engine of my Weasel .
    I ask if someone has the measure of the distance of the height of the oil suction tube (see photo) 
    and the diameter and the pitch (UNF / UNC) of the screws that stop the fuel level sensor on the tank.
    Thank you in advance
     
  2. 18 hours ago, Guido Ferluga said:
    
    Hello I found the float on the tank of the generator is practically identical I just have to make the hole for the fuel fishing. I ask you if you can kindly give me the dimensions of the system for simplicity 
    I am attaching a photo with highlighted the measures I need thanks

    Inkedstudebaker-weasel-m29-m29c-fuel_1_4dd5357b70de919905348218468848b8_LI.jpg

     

    IMG-20210325-WA0019.jpg

  3. Just to understand this is a universal 12 V sensor for gasoline tank for marine use adjustable cost from 25 to 30 € you have to calibrate it with the tool and make the hole of the fuel
    
     

    IMG_20161111_101003.jpg

    IMG_20161111_101008.jpg

  4. Hello I found the float on the tank of the generator is practically identical I just have to make the hole for the fuel fishing. I ask you if you can kindly give me the dimensions of the system for simplicity 
    I am attaching a photo with highlighted the measures I need thanks

    Inkedstudebaker-weasel-m29-m29c-fuel_1_4dd5357b70de919905348218468848b8_LI.jpg

  5.  

    Good morning I am looking for an oil pan, the front pulley,
     the fan and the carburetor. Used parts are fine

     

    Who do I ask for the gasket set or at least for the exhaust and cylinder head ones?
    . Thank you 
  6. Good day, I would need the dimensions of the tank with some photos of the details and perhaps of the internal bulkhead.
    I want to try my hand at making a replica as original as possible. thanks for any help you can give me.
    
     
  7. Good day I need some advice, I found a complete studebaker 170 engine of "automotive" origin at a good price and I wanted to know if with some tricks it can be mounted on the Weasel. Now I have a diesel engine on the vehicle. What do you think?
    The various parts are exchangeable on an original Weasel engine block.
    Thanks for your attention.

    Guido

    
     

    733_1111346825.jpg

    733_-2081044970.jpg

  8. Hi, I wanted to know if in addition to the construction plates of the hull there are chassis numbers printed somewhere on the vehicle,
     because unfortunately on my weasel I did not find any plate.

    Thanks

    
     
  9. No, I'm sorry, the seats are completely different, as the seat is attached to the body floor by means of two straps,
     while the back is always stuck on the floor and locked on the back by a spring catch similar to the closing of the GMC bonnet
    
     
×
×
  • Create New...