Jump to content

Guido Ferluga

  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by Guido Ferluga

  1. Hello to mount the rear plate of the clutch bell you need to widen some holes, as the oil passage caps are slightly offset from the original engine to that of the car / truck.
  2. Good evening again I ask for help to reassemble the engine of my Weasel . I ask if someone has the measure of the distance of the height of the oil suction tube (see photo) and the diameter and the pitch (UNF / UNC) of the screws that stop the fuel level sensor on the tank. Thank you in advance
  3. Thanks for the explanation and the advice, there is always something to learn, especially when you are dealing with the old "rusts"
  4. hi, you have an address to contact Yamulla? thanks
  5. Hi I wanted some advice on buying a carburetor kit as I would like to overhaul mine. Thanks
  6. Just to understand this is a universal 12 V sensor for gasoline tank for marine use adjustable cost from 25 to 30 € you have to calibrate it with the tool and make the hole of the fuel
  7. Hello I found the float on the tank of the generator is practically identical I just have to make the hole for the fuel fishing. I ask you if you can kindly give me the dimensions of the system for simplicity I am attaching a photo with highlighted the measures I need thanks
  8. Hi Jesse hope all is well, tell me when you find the pulley, by chance you don't have a regulator support and a carburetor? Thank you
  9. Good morning I am looking for an oil pan, the front pulley, the fan and the carburetor. Used parts are fine Who do I ask for the gasket set or at least for the exhaust and cylinder head ones? . Thank you
  10. grazie nessun problema il lunedì è perfetto
  11. Good day, I would need the dimensions of the tank with some photos of the details and perhaps of the internal bulkhead. I want to try my hand at making a replica as original as possible. thanks for any help you can give me.
  12. Good evening sorry for the late reply, i am looking for a water pump, a six valve fuel pump, valve covers and wiper motors. I am fine whatever conditions the spare parts are found Thanks for your help
  13. Yes thank you very much I will send you the list of what I need
  14. Good evening I am looking for the supports of the dynamo and a distributor complete with support. If anyone would give me the dimensions of the oil filter holder and coil holder I would be very grateful.
  15. Good day I need some advice, I found a complete studebaker 170 engine of "automotive" origin at a good price and I wanted to know if with some tricks it can be mounted on the Weasel. Now I have a diesel engine on the vehicle. What do you think? The various parts are exchangeable on an original Weasel engine block. Thanks for your attention. Guido
  16. Hi, I wanted to know if in addition to the construction plates of the hull there are chassis numbers printed somewhere on the vehicle, because unfortunately on my weasel I did not find any plate. Thanks
  17. There is someone who has a disassembled fuel tank who can give me the measurements, which I see replicating one since mine is from a truck. Thank you
  18. No, I'm sorry, the seats are completely different, as the seat is attached to the body floor by means of two straps, while the back is always stuck on the floor and locked on the back by a spring catch similar to the closing of the GMC bonnet
  • Create New...