Larry Mass
-
Posts
68 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by Larry Mass
-
-
Hi to all i hope everyone is safe and well. I got 1 track on my t15 after putting belting on the outside and inside of the track i also re rubbered the drive wheels idler wheels and return wheels. I don't have a track tensioning guage my question is how do i tell if the tension on the track is correct. I took the shims out of the stop bracket and the track still looks to tight to me so i am wandering if there is a way to tell if its to tight.
Thanks
Larry
-
-
Thanks Patrick and James great to see those pictures i like the pattern in the second picture. I would like to buy that print James if you have extra's.
Larry
-
Thanks Dan in your picture there looks like a pad just below the machine gun mount that is where the tabs are. What is that pad made of and what is the size?
Larry
-
Hi every one i have a couple of questions in my t15 i have a pipe on the right side of the hull under the driver seat and it is cut off at the floor and the top has a flair end what might this be for. Also on the wiring guard that runs along the inside of the hull there are 2 short 1/4 in bolts welded in sticking up on the top not sure what goes on them. There are 4 little clips on either side of the hull high and just in front of the drivers seat i am thinking it is for padding to protect the drivers knees am i right. What rubber handlesgo on the steering levers and is anyone reproducing them.
Thanks
Larry
-
Ya Patrick i went with a semi gloss white and used tremclad paint it seems to be a pretty tough paint and is a bit cheaper than automotive paint and also i can buy rattle cans for touch up if i wanted to can automotive paint it would cost me 17.00 per can and i would have to supply the paint. So is black the only color that they used for cam it kinda seems odd that they would use such a bold color. Could you send me a couple of pictures that you have of the cam pattern or where can i find them, i have looked on line but couldn't find much.
Thanks Patrick
Larry
-
Thanks Patrick and James
So James when they wanted to paint the cam on did they just give the guys a can of paint and a brush and say go at it or was there a standard pattern and if there was a pattern where can i find it and the placement also; was all the cam black because i thought somewhere i had seen a light gray. Any more information would be much appreciated
Larry
-
Hi guys i have been picking away at my t15 and as i work on it i have been wandering if the t15's were painted in winter camo. and if so is there a standard pattern that they follow and what is the color.
Thanks in advance
Larry
-
Thanks Jesse and Patrick great advice
Larry
- 1
-
This is a t96 1a but i am sure they are very similar i would consider putting a t84 in it if i could find one. Do you put the needle bearings on the shaft or inside the main shaft housing
Larry
-
-
-
Thanks i will try him again no luck the first time
Larry
-
-
Thanks for your quick replies i think i will use the T96 because the drive shaft fits and when i drove it there was no noise.
Thanks again
Larry
-
So is this a civilian transmission or did other models have the T96 in them
Larry
-
-
Has anyone have an idea what that switch is for or is it even the right transmission tail stock.
Larry
-
-
Thanks for the pictures Dan no my diluter tank is missing to not sure why they would have taken them off
Larry
-
Hi Dan sorry to bother you again i was wandering what size the holes are in the expanded metal mesh on the muffler guard and maybe a picture of it so i can fab one.
Thanks
Larry
-
Yes i have been watching that one but that is 125.00 USD so i have to add 30% or more plus that is shipping to US destination. But thanks for sending me the info.
Larry
-
Thanks Dan for the pictures that helps me out greatly. I checked with Dave and he has no more mufflers left but i see one on ebay its 165.00 canadian and shipping is almost 40.00 so i feel that is a bit over my budget so i will look for a domestic one for now, besides you won't see much of it after the muffler gaurd is on.
Larry
-
Thats great Dan i will check with Dave and do appreciate your help
Larry
Track tensioning
in Headquarters
Posted
Thanks Dan its going to be a while before i get the other track done as the belts are in really bad shape and can't be used i am really not sure what i can do.
Larry