OZM29C Posted February 6, 2020 Share Posted February 6, 2020 When reconditioning your rear hub assembly, you will need these. First off the outer hub. The most popular seal to use is the Caterpillar seal but there is also an alternative is a National oil seal 365008 . Please be aware that the width of this seal is only 6.35mm (1/4" inch). https://autoplicity.com/2379409-national-oil-seal Federal Mogul National Oil Seals - Hub Seal Alternative.docx 1 Quote Link to comment Share on other sites More sharing options...
OZM29C Posted February 6, 2020 Author Share Posted February 6, 2020 The next seal needed is the inner hub seal. Note: Knock out the old seal and Keep the OEM seal carrier. Fit the new seal into the new carrier paying particular attention to the orientation of the seal lips. 1 Quote Link to comment Share on other sites More sharing options...
OZM29C Posted February 7, 2020 Author Share Posted February 7, 2020 Keep a watch to see if the final drive felt seals come onto the market. I got these from ebay years ago. I think they came from Patson's parts in Alaska???? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.