Idaho Jim Posted January 13, 2022 Share Posted January 13, 2022 Raffi, I like the UHMW choice, as it is sturdy and doesn't rely on adhesives, but have a nagging concern about it being slippery. UHMW is about as slippery as it gets, but I also suspect that it will not be an issue in real life conditions. Now if you were to get up a full head of steam on a polished, flat concrete surface and hit the brakes, it would likely slide, but probably not under normal circumstances. What are your thoughts? Quote Link to comment Share on other sites More sharing options...
Pips_Blaauw Posted January 21, 2022 Share Posted January 21, 2022 On 12/22/2021 at 4:28 AM, Raffi said: Hi! Great work!! I am planning to try and make some of these myself. Do you have some measurement of these blocks? the rubber pads on my weasel are to worn to use as a template.... Hope to hear from you! Regards, Rob Quote Link to comment Share on other sites More sharing options...
Raffi Posted January 25, 2022 Author Share Posted January 25, 2022 Hi Rob I made them 3-1/2" long, 1-1/4" wide and 1 tall/thick. Thanks, -Raffi 1 Quote Link to comment Share on other sites More sharing options...
Raffi Posted January 25, 2022 Author Share Posted January 25, 2022 Hi Idaho Jim, I did notice slight friction loss (upon acceleration/takeoff) on a nicely paved long driveway last time I had it out. No issues noticed on shop concrete floors. Hope to do some more driving/testing soon. Will keep you posted, thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.