Jesse Browning Posted February 26, 2020 Share Posted February 26, 2020 We will be completing an M29C weasel in a few weeks. The hull was stripped and sandblasted. All suspension was dissassembled, cleaned, repaired if needed. Engine torn down. Float tanks reskined. Has all floor sections, winch parts, skirts. Engine section partitions. Original sprockets like new. New rubber on sprocket wheels. All other rubber in nice shape. One track has 3 repairs. The other track is intact. One seat. No wipers. Starting at about $35k US. It’s easier to email picture to interested parties. It will go on Milweb when finished. Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted February 26, 2020 Author Share Posted February 26, 2020 Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted February 26, 2020 Author Share Posted February 26, 2020 It will have complete rudder system. Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted February 26, 2020 Author Share Posted February 26, 2020 Will have data plates, and stretcher foot pockets Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted February 26, 2020 Author Share Posted February 26, 2020 It has nicest fuel tank Ive seen on any WWII vehicle. Quote Link to comment Share on other sites More sharing options...
M29 Posted February 28, 2020 Share Posted February 28, 2020 Very Nice Jesse wish mine was as far along Dan Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted February 28, 2020 Author Share Posted February 28, 2020 Thanks. Quote Link to comment Share on other sites More sharing options...
M29 Posted February 28, 2020 Share Posted February 28, 2020 HI Jesse From the pictures of your floater rebuild of all the suspension parts was curious what you did about rebuilding of the bogeys seals bearings and replacing yoke/spring bolts. Did you replace with new or were most of the parts in good shape.I am tempted to put in all new bearings seals but price would easily be a grand. In reality I will probably reuse any good ones and call it a day. The spring yoke bolts are worn and there is slop so will probably replace. Any thoughts would be appreciated. Dan Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted February 28, 2020 Author Share Posted February 28, 2020 Almost all the parts on this weasel were in remarkably nice shape. Other than one missing seal, one missing key, and some of the outer washers inside the wheels, they were in great shape. The suspension bolts were nice shape also. None were plugged as on previous restoration. Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted March 19, 2020 Author Share Posted March 19, 2020 On the road. Quote Link to comment Share on other sites More sharing options...
M29 Posted March 19, 2020 Share Posted March 19, 2020 Looks Awesome Jesse. I would like to know more about how you did your track bands. Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted March 19, 2020 Author Share Posted March 19, 2020 These tracks are original. The ones I rebuilt before look very similar to the one in your picture. Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted March 19, 2020 Author Share Posted March 19, 2020 Quote Link to comment Share on other sites More sharing options...
M29 Posted March 20, 2020 Share Posted March 20, 2020 Thanks for the pictures very nice! Quote Link to comment Share on other sites More sharing options...
nwarcade Posted April 13, 2020 Share Posted April 13, 2020 Wow, seriously nice work Jesse. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.