Larry Mass Posted March 22, 2021 Posted March 22, 2021 Hi every one i have a couple of questions in my t15 i have a pipe on the right side of the hull under the driver seat and it is cut off at the floor and the top has a flair end what might this be for. Also on the wiring guard that runs along the inside of the hull there are 2 short 1/4 in bolts welded in sticking up on the top not sure what goes on them. There are 4 little clips on either side of the hull high and just in front of the drivers seat i am thinking it is for padding to protect the drivers knees am i right. What rubber handlesgo on the steering levers and is anyone reproducing them. Thanks Larry Quote
M29 Posted March 23, 2021 Posted March 23, 2021 Hi Larry the two bolts on the wiring guard are for the 30 cal machine gun mount not sure about the small tabs. Dan Quote
Larry Mass Posted March 23, 2021 Author Posted March 23, 2021 Thanks Dan in your picture there looks like a pad just below the machine gun mount that is where the tabs are. What is that pad made of and what is the size? Larry Quote
M29 Posted March 24, 2021 Posted March 24, 2021 All I have left is the wire ring that formed the shape of it. I think it was a cushion for the drivers legs one on each side maybe both the guy in the front seat and the one in the rear. Dan Quote
M29 Posted March 24, 2021 Posted March 24, 2021 (edited) Here is another picture of the mount and what remains of one of the cushions on my T15. Maybe the tabs held the pads in place?? Dan Edited March 24, 2021 by M29 Quote
JamesD Posted March 25, 2021 Posted March 25, 2021 Hello i have t15 692 The photo below is for the Thompson SMG bracket Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.