RAS1 Posted June 23, 2021 Share Posted June 23, 2021 So I'm a long way off, but what have people done to replace the firewall padding? Specifically, the one by drivers foot that the ventilator lid handle stop is riveted to? The rivites would need to come off, insulation on, and then re rivet the catch bracket and keep it spaced away from panel. Are reproduction panels available, or what are people making them from. Thanks Dave Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted June 23, 2021 Share Posted June 23, 2021 Looks like the particle board you can get from Home Depot. Quote Link to comment Share on other sites More sharing options...
RAS1 Posted June 23, 2021 Author Share Posted June 23, 2021 Thanks Jesse! Is it the 1/4" thick? Dave Quote Link to comment Share on other sites More sharing options...
M29C3284 Posted June 23, 2021 Share Posted June 23, 2021 @RAS1It's 1/2" thick. Quote Link to comment Share on other sites More sharing options...
M29 Posted June 24, 2021 Share Posted June 24, 2021 Homasote Board was recommended on the old weasel site as a oem looking material for use in the kick panel area https://www.amazon.com/16-24-Homasote-Board-Pack/dp/B00JMH9K2G/ref=sr_1_4?dchild=1&keywords=homasote+board&qid=1624499076&sr=8-4 Quote Link to comment Share on other sites More sharing options...
RAS1 Posted June 24, 2021 Author Share Posted June 24, 2021 Awesome advice! Great! Now I just need to figure where exactly it all goes! Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.