darth_kitten Posted March 24 Share Posted March 24 Looking for some info if someone has it handy. What are the angles of the "steps" on the lower part of the hull? Circled in red. What about the hinges? Are there any sources for them? Quote Link to comment Share on other sites More sharing options...
Patrick Tipton Posted March 24 Share Posted March 24 Greetings Mark: The Studebaker Museum does sell blueprints/drawings so you can likely purchase them, although it isn't always a quick turnaround. I don't have a floater so I can't get you measurements. Quote Link to comment Share on other sites More sharing options...
M29C3284 Posted March 24 Share Posted March 24 (edited) The angled cut at the rear is 45 degrees. At the front it follows the same angle as the tub. I got my hinge halfs from Robert Walsh over ten year ago. I don't know if he has any left, but you can always contact him. Here's also a few pictures I took when I did mine. Edited March 24 by M29C3284 2 Quote Link to comment Share on other sites More sharing options...
darth_kitten Posted March 24 Author Share Posted March 24 (edited) Thanks for the information Gents! M29C3284 and Patrick Tipton, I check your threads for examples, but just wanted to confirm angle. I'll check with Robert to see if he has any more hinges left. Edited March 24 by darth_kitten Quote Link to comment Share on other sites More sharing options...
Jesse Browning Posted March 25 Share Posted March 25 Try Mcmaster Carr for the hinges. I made all my own for 2 weasels. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.