Wiper questions

[rml1708]

I am looking at my wiper motors and they do not have connectors on the end of the wiring.  The harness and shielding are on the wipers, there is just no connectors.  From what i can determine it appears that the connectors are probably a Cole Hersee connector but there is little to no info that I can find.  I do not have any photos of the flange mounted socket connectors.  I do have the photos OZM29C posted with the NOS wiper that show the plug.   Any photographic help would be appreciated.

 

I am also looking for a short side wiper link, and of course I need one of the wiper links.  I have read that someone used to make repop short side links but I expect I am very late to that gig.  Again any help would be greatly appreciated.  Even if someone has a dimensioned drawing of any sort that I could use to make one until something is found.

Robert

[F-D Zernia]

Robert,

    I happened to be removing wiper assembly’s from a wind screen this week and have not packed them away for later yet. Here are some pictures of the short arm. I hope it helps. There are some small bends to clear the mechanisms. This should get you close  

Fred 

[OZM29C]

@rml1708Gary Szechy from Gary's Bunker https://www.garysbunker.com/product-category/m29-parts/  did manufacture a very limited production run of the short wiper link.

It would be worth asking the question to see if Gary could again reproduce this short wiper arm?

[Prc148]

I have the cole-hersee plugs if needed.