Jump to content

OZM29C

Moderators
 View Profile  See their activity

  • Posts

    776

  • Joined

  • Last visited

  • Days Won

    193

 Content Type 

Everything posted by OZM29C

  1. OZM29C
    2020
  2. OZM29C
    July 2019
  3. OZM29C
    January 2019
  4. OZM29C
    February 2019
  5. OZM29C
  6. OZM29C
    24 February 2018
  7. OZM29C
    July 2017
  8. OZM29C
    21 January 2018
  9. OZM29C
    2/3 December 2017
  10. OZM29C
    16 September 2017
  11. OZM29C
    19-20 August 2017
  12. OZM29C
    September 2017
  13. OZM29C
    August 2017
  14. OZM29C
    2016 ???????
  15. OZM29C
    29 May 2016
  16. OZM29C
    26 June 2016
  17. OZM29C
    19 June 2016
  18. OZM29C
    17 January 2016
  19. OZM29C
    6 January 2016
  20. OZM29C
    October 2015
  21. OZM29C
    Fellows, this is going to be a picture heavy blog from me with regard to how I rebuilt my front float tank. I hope that you will gleen some ideas from my experience when it comes to rebuilding your tanks. Cheers.
  22. OZM29C
    @Pips_Blaauw The weasel float tanks are an engineering marvel. Having the drawings would be a real asset however my best advice would be to persevere and try to find a set of tanks no matter what their condition or where they are in the world. The photo below shows what the bottom of my front tank looked like when I got it. If Patrick @Patrick Tiptonhad a sticky page or some such I would happily post all of my float tank repair photos for you to look at. There are other forum members who would also add to this sticky page with their own float tank experiences.
  23. OZM29C
    I have fitted my new John and Mary Worthing Canvasco UK seat back covers complimented by my NOS seat cushions that I purchased back in 2002. Unfortunately I could not fit the new Canvasco seat covers to the nos wire sprung seat cushion as they have been made to fit a parallel seat top whereas my Nos seat bases tapers front (high side) to the rear (low side). The colour of the new and nos canvas is close so I will leave them in place for the time being. I have also fitted my seat belts. Not OEM but they look the part.
  24. OZM29C
    @42rocker Don't get me wrong, the VWOM wiring harness is an excellent product and apart from that one small typo, it was a straight forward task to install the wiring. There is no way that I would install a NOS harness. I initially went down that path and when I started to unravel the harness I could see and hear the old harness insulation cracking. A couple of happy snaps of my VWOM harness are attached
  25. OZM29C
    @Beepbeep Your sprocket teeth look decidedly worn. I have got a drawing somewhere at home that shows the correct tooth profile but as a comparison, attached is a photo of my LAR sprockets and you can see the difference in the teeth when compared to yours. Unfortunately LAR don't make this sprocket any more.
×
×
  • Create New...