OZM29C
Moderators-
Posts
779 -
Joined
-
Last visited
-
Days Won
193
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by OZM29C
-
@F.Janssen Just sending through my engine number for M29C7333. T24-10275 Please note that this engine is not original to my hull.
- 93 replies
-
- history
- manuals & reference info
-
(and 1 more)
Tagged with:
-
@Patrick TiptonGreat engine video. From my experience, if the opportunity does present itself, get your crankshaft crack tested. For whatever reason I had 5 crankshafts tested in the search for a usable crank. They were all cracked. In the end I paid a premium and purchased a NOS crankshaft. Also if in your repair programme you have had to run a thread tap right through your spark plug holes, you can fit a longer reach spark plug. In my case I fitted good quality NGK BP6HS plugs. Keep the updates coming👍👍👍
- 356 replies
-
- 1
-
- restoration thread
- hull & sheet metal
-
(and 2 more)
Tagged with:
-
-
Byron’s TM1990 Rubber Track Manual for Weasel M29 & M29C
OZM29C replied to Byron's topic in Headquarters
1950's and no rubber pads etc for hard surfaces. Only Ice grousers as highlighted by Steve above. -
@Guido FerlugaIf no one replies sooner I will get back to you on Tuesday with the dimensions that you need.
-
Took the weasel for a quick test run to check that the fuel sender did not leak. All good now. IMG_3891.MOV
-
Byron’s TM1990 Rubber Track Manual for Weasel M29 & M29C
OZM29C replied to Byron's topic in Headquarters
Like Dan @M29 I opted to pay extra for the LAR track. I wanted piece of mind when operating my weasel, particularly in water. The LAR track is a very robust design (as tested by Rick Wark) and was based on the Ambiliary track. The EPF (Expedition Polaris Francais) Weasels that came out of Antarctica (photos below) were fitted with these tracks and you can see the similarity between the LAR and Ambiliary track. I do understand that people on a restoration Budget look at options to repair tracks but in my case I just opted for new. BTW this is not a post to put down the Staaman track kit. I think that each track repair kit has both pros and cons. More importantly, the weasel community is very fortunate that these track kits are available which was not the case when I started my weasel restoration 22 years ago. -
Byron’s TM1990 Rubber Track Manual for Weasel M29 & M29C
OZM29C replied to Byron's topic in Headquarters
Just a quick question? What is the price difference between the LAR tracks that are available locally in the US of A as opposed to the Rubber Staaman track kit that has to be imported from Europe? -
Have you ever wondered what was inside a fuel tank sender unit. I have recently had to refurbish my fuel tank send unit so I took a few happy snaps to share. The soft solder that secured the fuel pick up pipe to where it goes through the sender unit had sheered. This in turn created an external fuel leak by the fuel sloshing around in the tank. I tried to re solder the joint in situ but met with no success. I decided to dismantle the sender unit so I could silver solder all of the joints proper. I am now just waiting on some rubberised cork gasket material in order to reassemble the unit. The sender units are well made but very delicate to get the internals apart.
-
@Patrick Tipton Patrick, again brilliant work. Your attention to detail raises the bar on weasel restoration. Why would someone go to the trouble of cutting the brackets off???? I have seen them crushed and torn off but to cut them off????
- 356 replies
-
- 1
-
- restoration thread
- hull & sheet metal
-
(and 2 more)
Tagged with:
-
I machined the bushings to suit from stock bronze. A very simple job for a capable machinist.
- 16 replies
-
- suspension
- tracks
-
(and 1 more)
Tagged with:
-
@04mustangAs an alternative to the return roller needle bearing, I have fitted bronze bushings. This mod was done to the Australian Weasels operating in Antarctica. This mod also allows you to fit a wider bushing (on one side only) to more evenly distribute the load. The take out return roller shafts that I have all show extreme wear in way of the needle rollers. The needle rollers don't take too kindly to lack of lubrication and being exposed to water/moisture. Just a thought. I have attached a couple of photos for you to study. Cheers Return roller gasket.pdf
- 16 replies
-
- 2
-
- suspension
- tracks
-
(and 1 more)
Tagged with:
-
@Patrick TiptonThanks Patrick👍👍 @Will DodgeI believe that the stretcher brackets on a T24/M29 differ from the M29C. Patrick may be able to help out here. The attached photo of Gile's weasel in the UK clearly shows a rear stretcher bracket but I am not sure if this is OEM or Norwegian.
- 12 replies
-
@Will DodgeI think that the handles would clear the driver with room to spare. I apologise for the photos being upside down, this happens when I post photos with my I phone. Hopefully @Patrick TiptonPatrick can correct the photos for you.
- 12 replies
-
- 1
-
- 12 replies
-
- 1
-
@Will DodgeI can take photos showing the individual stretcher brackets fitted to my Weasel if that would help.
- 12 replies
-
@Will DodgeI think this excellent photo of Brock Jolliffe's M29C might help to answer your question.
- 12 replies
-
@F.JanssenAny chance of identifying the weasels that are fitted with flotation equipment?
- 93 replies
-
- history
- manuals & reference info
-
(and 1 more)
Tagged with:
-
I refitted the accelerator mod kit to my weasel as it had already been partially fitted before I got the weasel. The mod works well. No cables etc. Took some extra time to fit it as the instructions call for the various panels to be flame cut and then filed. If you read the attached instruction sheet you will see that there was a good reason for the change with an Urgent priority. All in all though its your choice. MWO ORD G179-W9.pdf
-
Dave Yamulla would be your best bet.
-
@Patrick TiptonThe ORD 9SNLG 179 that Patrick sent me states that an M29C Capstan rope is 3 strand 3/4inch (19mm) diameter 100feet(30.5metres) in length. There were two part numbers for the rope, one part number supersedes the other. The older parts manual lists a tow rope for the M29 1inch (25.4mm) diameter 20feet (6.1metres) Long with7/8inch(22.23mm) hooks.
-
-
@Patrick Tipton Thought this might be of interest to fellow weasel owners. Attached is the Weasel trials report conducted by the Australian Military. Unfortunately there is not much left of 145623 today. 145623 has the ORD number 1002 making it the last T24 built before switching to the M29. Anyway enjoy the read.
-
-
@Will DodgeHere is a start Translation of nordoc 2-4.doc Translation of nordoc 6-8.doc Translation of nordoc 12-13.doc